|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
Not sure exactly what you want to order? Use the product charts below to determine which part number you're looking for, then call our customer service department at 1-800-423-4277. Product Charts:
The ability of Wilson Industries to design and create made-to-specification curtain products has always been one of our strengths. Facility applications vary widely and a standard packaged product may not be sufficient. Wilson Industries is your answer, when seeking a solution for:
Please contact our customer service department at 1-800-423-4277 for design and application guidance in selecting the most appropriate curtain solution for your facility’s safety requirements.
Cut size: Actual finished
size may vary 3" in height and widths. Custom sizes available. Minimum size for pricing a made to order curtain is 20 sq.ft. Rip Stop is available in Green (#95),
Yellow (#85), Orange (#75), Blue (#65),
* Rip-Stop is available in green (p/n-95), blue (p/n-65), red (p/n-35) or black (p/n-55). Re-covers (Safety Curtains) are available upon request. Per OSHA recommendations, all curtains allow 1 ft. clearance at floor. Wilson Stur-D-Screens are shipped disassembled as a complete package including 1" square steel frame, platform T legs, lacing ties, bolted corner brackets, and safety curtain.
Per OSHA recommendations, all curtains allow 1 ft. clearance at floor.
Per OSHA recommendations, all curtains allow 1 ft. clearance at floor. Available in made to order heights and widths
contact factory for ordering information.
Shipped disassembled. Wilson Stur-D-Shields are shipped disassembled as a complete package, and include 1" square steel frame, bolted corner brackets, lacing ties and safety curtain. Stur-D-Shields do not include platform legs.
* Meets California Fire Marshal requirements. Minimum size for pricing a Custom Fabricated
/ Made to Order curtain is 20 square feet. All Wilson Fabrics can be electronically welded or sewn together in any size and/or combinations requested. NOTE: Wilson Industries fabrics are not intended to replace the use of goggles, visors, inspection window, safety lens, and/or helmets for eye protection. How to Choose Your Weld-0-Glass Fabric High Temperature Fabrics Weld-0-Glass Uses How to Order
2. Determine dimensions of area to be protected. 3. Choose roll goods or size of finished blanket.
(VP) Vertical Plane
Wilson recommends the use of welding blankets in multiple layers to attain proper molten metal and radiant heat protection. Blankets are hemmed on all four sides and have grommets in each corner and on 36" centers. Actual finished size of blanket may vary 3" in height and width. 1. What are your safety and comfort needs? Take a look at your work area. Are there sections that could be divided into specific stations?
Now look at the shapes below and see whether these can work for you. Enclosures and doors can be designed in any configuration and combination.
2. Sketch out your design and list the hardware components needed. Draw the design you want, and note the components needed on the attached Order Form. Refer to the "hardware components" selection chart on the Order Form to see all components offered. UNIVERSAL MOUNT
SUB100. SB500 SUPPORT BRACKET/CHANNEL TRACK Note: Curtains are easily replaced. Loosen nuts, remove cover plate, cut and punch the strip and fit it over the studs. 3. Choose strip curtain for your specific application. Considerations in choosing strip width, thickness and type of curtains: A .Question: How do I determine what size strip I need? Answer: Wilson recommends using the following guidelines in reference to strip size:
B. Question: How do I determine the overlap I need? Answer: A rule of thumb would be -- for light pedestrian or fork lift traffic, use a partial overlap. If you need protection from heavy fork lift traffic or noise and temperatures, use a full overlap. C. Question: Do I need a ribbed or reinforced strip curtain? Answer: You would only need the ribbed or reinforced strip if you have a high traffic area using pallet jacks, forklifts, highly abrasive materials, etc. D. Question: What if I need strips in a low temp or food grade area? Answer: Wilson does offer both low temp and USDA approved strip materials. E. Question: Do the strip curtains offer light protection from welding? Answer: Wilson has Strip Curtains available in See-Thru Amber and Spectra Orange. These materials offer the same protection from dangerous U.V. radiation and arc glares as Wilson's innovative welding curtains and screens. 4. Now, ordering your Wilson curtains is as easy as ABC.
5. If you'd like to order extra replacement strips. All Wilson strip curtains are also sold in roll lengths. If you need to replace your strips, it's great to have a roll around. You'll just cut the length you need and replace any number of strips. Go to the attached Order Form to order replacement rolls. Strip curtains are easily replaced. Just loosen nuts, remove cover plate, cut and punch the strip and fit it over the studs. 6. Fill out the attached Order Form . Fill out an Order Form for each enclosure and call it in or fax it to your distributor. On each form, you'll list your hardware components, the type of curtain, and any extra replacement strip rolls if desired. Please call Wilson with any questions or to help you fill out the Order Form before submitting it to your distributor. All Strip Curtains can be purchased by strip, yard or roll
*1/2 overlap for 8" and 16" strips, 2/3 overlap for 6" and 12" strips USDA, reinforced or ribbed materials available. Contact factory for price. How to size your own Auto-bay workstation 5 Easy Steps to Ordering 1. Height - Determine the overall preferred height of your curtains.
2. Width - Determine the necessary width (total linear foot measurement) of each side of your design.
3. Curved Corner Sections
4. Track Mounting Hardware - To complete your design, determine if your curtains and track system will be:
5. Pricing - Determine the total price of your system.
Curtains are available in 6 styles and a variety of color selections. Curtains can be accessorized with:
Curtains are warranted from defects of material and workmanship for a period of five years when used under normal work conditions. Click here for more information.
Stainless Steel Mesh Stur-D-Screen
Stainless Steel Mesh Chip Guards are shipped disassembled
as a complete package, Shield with a 50% drape Please specify width and height when ordering. Include proper drape for protection. |
|
